realtek pcie gbe family controller driver - D-Link DFE-530TX PCI Fast Ethernet Adapter

If your Ethernet isn’t working or you’re setting up a fresh Windows install, you likely need the realtek pcie gbe family controller driver. This page gives you the correct package for D-Link DFE-530TX PCI Fast Ethernet Adapter with a clean, direct file and clear instructions so you can get your network back online fast.

Download - D-Link DFE-530TX PCI Fast Ethernet Adapter for Realtek PCIe GBE

Device type: Network Adapters

Supported OS: Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows NT 4.0, Windows 95a (osr1), Windows 98, Windows 95b or higher (osr2)

Driver version: 5.398.0812.2004

File name: dlink.zip

Date added: 2003-08-17

Model: D-Link DFE-530TX PCI Fast Ethernet Adapter

To begin, Click on the download link.

How to install

Troubleshooting common install issues

• Device not detected: Ensure the Ethernet adapter is enabled in BIOS and properly seated. Try a different PCIe slot if available.
• Code 10 or yellow exclamation: Uninstall the device in Device Manager, check Delete the driver software for this device, reboot, then reinstall the realtek pcie gbe family controller driver.
• Wrong driver message: Verify you’re installing for Network Adapters and the correct model D-Link DFE-530TX PCI Fast Ethernet Adapter.
• No network after install: Disable power management on the adapter (Device Manager → Properties → Power Management → uncheck Allow the computer to turn off this device to save power).
• Legacy Windows INF signing: On older OS like Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows NT 4.0, Windows 95a (osr1), Windows 98, Windows 95b or higher (osr2), ignore unsigned prompts or use the Have Disk method.
• Rollback needed: In Device Manager → Adapter → Properties → Driver → Roll Back Driver if a newer package caused issues.

FAQ

Which operating systems does this package support?
It supports Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows NT 4.0, Windows 95a (osr1), Windows 98, Windows 95b or higher (osr2). For newer Windows versions, use the latest manufacturer release.

How can I confirm the driver installed correctly?
Open Device Manager → Network adapters. You should see Realtek PCIe GBE without warnings. The Driver tab should show version 5.398.0812.2004 (or the version you installed).

Is this the right file for D-Link DFE-530TX PCI Fast Ethernet Adapter?
Yes. The package is tailored for Network Adapters using the Realtek PCIe GBE chipset under the D-Link DFE-530TX PCI Fast Ethernet Adapter model name.

Do I need to uninstall old drivers first?
Recommended. In Device Manager, uninstall the adapter and check Delete the driver software, then install the new realtek pcie gbe family controller driver.

Why download from driverfiles.net?

We provide curated, malware‑scanned packages with clean filenames and clear metadata, so you can install the realtek pcie gbe family controller driver confidently. Each listing includes Network Adapters, supported Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows NT 4.0, Windows 95a (osr1), Windows 98, Windows 95b or higher (osr2), model D-Link DFE-530TX PCI Fast Ethernet Adapter, file details like dlink.zip, and version 5.398.0812.2004 to match your system precisely.