intel serial io driver - Controller ATA seriale standard AHCI 1.0

Find and install the right intel serial io driver fast

If your touchpad, sensors, or I2C‑SPI devices aren’t working correctly, the intel serial io driver is often the missing link. This page helps you quickly download and install the correct package for Controller ATA seriale standard AHCI 1.0, with clear steps for 32‑bit Windows and practical troubleshooting.

Supported systems: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit - Device type: SATA Controllers - Driver version: 12.8.0.1016.

Package reference: driver72008.zip

Download - Controller ATA seriale standard AHCI 1.0 intel serial io driver

Driver model: Controller ATA seriale standard AHCI 1.0

Device type: SATA Controllers

Supported OS: Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit

Driver version: 12.8.0.1016

File name: driver72008.zip

Date added: 2013-03-04

• Clean source - malware‑scanned archive
• Matches 32‑bit Windows for legacy systems
• Includes INF for manual Device Manager install

Click on the download link.

How to install

Troubleshooting common issues

• Driver won’t install on your OS: Verify you’re on 32‑bit Windows listed under Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit. A 64‑bit system needs a different package.
• Device not found: In Device Manager, View → Show hidden devices. Check under System devices for Intel Serial IO I2C, SPI, or UART controllers.
• Signature enforcement errors: Restart → hold Shift while selecting Restart → Troubleshoot → Startup Settings → press 7 to disable driver signature enforcement, then install.
• Code 10 or Code 28: Uninstall the device → check “Delete the driver software for this device” → restart → install again from the extracted INF.
• Touchpad/sensor still not working: Install chipset drivers first, then this intel serial io driver, followed by vendor‑specific touchpad or sensor drivers.
• Rollback required: Device Manager → Properties → Driver → Roll Back Driver if the new version causes issues.

FAQ

What does the intel serial io driver do?

It enables low‑level I2C, SPI, and UART communication for peripherals like touchpads, sensors, and embedded controllers. Without it, some input devices may not respond.

How can I confirm the installed version?

Device Manager → System devices → Intel Serial IO I2C/SPI/UART Controller → Properties → Driver tab. Compare with 12.8.0.1016.

Is this package compatible with my system?

If you run a 32‑bit edition listed in Windows 10 32 & 64bit, Windows 8.1 32 & 64bit, Windows 7 32 & 64bit, Windows Vista 32 & 64bit, it’s compatible. For 64‑bit, download the x64 variant.

Do I need to uninstall an old driver first?

Not always. If updating from a close version, choose Update driver and point to the new folder. If you see errors, uninstall the old entry and reinstall clean.

Where does this driver appear in Device Manager?

Under System devices as Intel Serial IO I2C, SPI, and UART controllers, and sometimes under Human Interface Devices for connected peripherals.

Why download from driverfiles.net

We provide curated, malware‑scanned packages with clear metadata, so you can install the intel serial io driver for Controller ATA seriale standard AHCI 1.0 confidently. Each file is checked for integrity and matched to the stated device type SATA Controllers and OS list. Fast access, clean downloads, and practical guides help you get working in minutes.