canon dr-2010c driver - Canon DR-2010C Scanner Driver

Looking for the latest canon dr-2010c driver so your scanner works smoothly on Windows? You’re in the right place. Below you’ll find a clean download section, supported systems, and simple step-by-step install guides for every common file type.

This package is for Scanners and supports Windows XP, Windows Vista 32-Bit, Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit. If you’re unsure which file you need, follow the install instructions matching your file extension.

Download - canon dr-2010c driver

Driver model name: Canon DR-2010C Scanner Driver

Device type: Scanners

Supported OS: Windows XP, Windows Vista 32-Bit, Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit

Date added: 2025-11-22

Click on the download link.

How to install

Troubleshooting common issues

• Driver won’t install - Make sure you’re on a supported OS: Windows XP, Windows Vista 32-Bit, Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit. Run the installer as admin and temporarily disable third‑party antivirus if it blocks the setup.
• Device not detected - Use a different USB port and cable, avoid USB hubs, and power cycle the scanner. Check Device Manager for unknown devices and install via the INF method.
• 64‑bit vs 32‑bit - Install the package that matches your Windows architecture. A 32‑bit driver may fail on 64‑bit Windows.
• Windows replaced the driver - In Device Manager, right‑click the scanner → Update driver → Browse my computer → Let me pick → select the canon dr-2010c driver you installed.
• Code 52/driver signature - Boot into Advanced Startup → Disable driver signature enforcement, install, then reboot normally.
• Scan app can’t see the scanner - Ensure TWAIN/ISIS components are installed and select the correct device inside the application’s scanner list.

FAQ - canon dr-2010c driver

Which Windows versions are supported?
Windows XP, Windows Vista 32-Bit, Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit are supported for this Scanners driver.

There’s no setup.exe in my download. How do I install?
Use the manual INF method from Device Manager as shown above. Point Windows to the folder containing the .inf file to install the canon dr-2010c driver.

My scanner shows as Unknown device. What now?
Reconnect directly to a rear USB port, replace the cable, then update the driver manually via INF. If needed, uninstall the device in Device Manager and scan for hardware changes.

How do I confirm the driver version?
In Device Manager → Imaging devices → your scanner → Properties → Driver tab. You can compare it with the package’s field if provided.

Why download from driverfiles.net?

We focus on safe, trusted packages for legacy and current hardware like the canon dr-2010c driver. Each file is sourced carefully, packaged cleanly, and presented with clear instructions for Scanners on Windows XP, Windows Vista 32-Bit, Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit. Our pages are lightweight and straightforward, helping you get the Canon DR-2010C Scanner Driver driver quickly and without confusion.