HP DeskJet 2722 Driver, Printer Offline Errors, and Wireless Printing Problems
The HP DeskJet 2722 driver allows Windows to communicate with the printer for wireless printing, scanning, and queue management. When the correct driver configuration is missing or replaced, the printer may appear connected but remain unavailable for printing, display an offline status, or accept print jobs without producing output.
This page provides the latest HP DeskJet 2722 driver download together with troubleshooting notes describing situations where the printer disconnects from Wi-Fi, remains offline in Windows, or stops printing after system updates.
Problem: HP DeskJet 2722 appears offline in Windows
What users observed: The printer appeared in Windows printer settings but showed an offline status even though the device was powered on and connected to the same wireless network as the computer.
What was tried: Users restarted the printer, restarted the computer, and reconnected the printer to Wi-Fi through the HP Smart setup process.
How this played out: In many cases the printer had received a new IP address from the router while Windows was still attempting to communicate with the previous address. Updating the printer port configuration or reinstalling the printer with the correct network address restored communication.
Problem: HP DeskJet 2722 installed but will not print
What users observed: The printer appeared ready in Windows and accepted print jobs, but no pages were printed. Documents remained in the print queue or disappeared without printing.
What was tried: Users cleared the print queue, restarted the printer, and attempted to resend the document.
How this played out: The problem was often caused by a stalled Windows print spooler or by the printer being installed with a generic Windows driver instead of the correct HP driver. Restarting the spooler service and reinstalling the proper HP DeskJet 2722 driver resolved the printing conflict.
Problem: HP DeskJet 2722 disconnects from Wi-Fi
What users observed: The printer worked normally after installation but later appeared offline or disconnected from the system, especially after the router restarted or the printer entered sleep mode.
What was tried: Users restarted the printer, reconnected the printer to the wireless network, and attempted to reinstall the printer through the Windows printer setup wizard.
How this played out: The router had assigned a new IP address to the printer while Windows continued sending print jobs to the previous address. Reinstalling the printer with the updated network address or configuring the printer with a static IP resolved the communication problem.
Problem: Printing stopped after Windows update
What users observed: The printer previously worked normally but stopped printing after a Windows update was installed.
What was tried: Users restarted the system, removed the printer from Windows settings, and attempted to reinstall it automatically.
How this played out: Windows had replaced the HP driver with a generic print driver that lacked full support for the device. Reinstalling the correct HP DeskJet 2722 driver restored full printing functionality.
Across HP DeskJet 2722 troubleshooting reports, the recurring pattern is that the printer hardware remains functional while the operating system loses the correct driver configuration or network communication path. Reinstalling the proper driver and correcting the printer’s network port configuration typically restores normal printing.
Other devices showing similar behavior:
- Scans your system for missing or outdated drivers
- Downloads and installs the correct versions
- Creates a restore point before making changes