Samsung M2070 Driver, Toner Not Compatible Error, Wi-Fi Setup Failure, and Printing Issues
The Samsung M2070 driver enables communication between the printer and connected systems for printing and scanning. When the printer refuses to print, reports cartridge errors, or fails to connect over Wi-Fi, the driver is often suspected, but many cases are tied to Samsung M2070 not printing, not compatible toner cartridge error, or Wi-Fi setup not completing rather than a driver fault.
This page provides Samsung M2070 driver context together with troubleshooting notes describing situations where Samsung M2070 toner not recognized, printer visible but not printing, or Samsung M2070 Wi-Fi setup failure occur despite driver changes.
Problem: Samsung M2070 Sudden “Not Compatible Toner Cartridge” error
What users observed: The printer had been working normally for well over a year, using the same toner, when it abruptly refused to print. The device began reporting that the installed toner was not compatible, even though the cartridge was not empty and had already been in use without complaints.
What was tried: Attention initially stayed on software and drivers, since nothing else had changed. Swapping cartridges showed that other cartridges were accepted, while one specific cartridge repeatedly triggered the error. Cleaning and reseating the cartridge altered the behavior immediately.
What this turned out to be: A toner cartridge recognition/contact issue, not a driver failure. The cartridge in question was refillable and not an original Samsung unit, which appeared to matter once contact recognition failed.
Where this sometimes ended: Printing resumed as soon as the cartridge was recognized again. The driver was never the deciding factor, even though it was the first suspect.
Problem: Samsung M2070 Printer visible but does not print after OS change
What users observed: After switching to Linux Mint 22.1, the Samsung M2070 appeared present and selectable, but print jobs stalled silently. Paper and jobs were visible in the system, yet nothing physically printed.
What was tried: Multiple attempts focused on configuration without changing the underlying driver package. Only after replacing the driver stack did the printer’s behavior change.
What this turned out to be: An incompatible or outdated driver stack after OS change, not a generic driver failure.
Where this sometimes ended: Printing began working once the driver source matched the current support model under HP. Prior attempts gave no partial improvement.
Problem: Samsung M2070 Wireless printing never completes setup
What users observed: With two computers involved, one running Windows 11, the printer failed to complete wireless pairing. Pressing the WPS button did not produce a code or confirmation, and no printed setup information appeared. The printer remained tethered by USB as a result.
What was tried: Repeated wireless setup attempts were made under the assumption that the driver or Windows configuration was blocking progress. The printer itself did not provide feedback that clarified where the process failed.
How this played out: Wireless functionality depended on Samsung M2070 Wi-Fi setup completion and device-side configuration, not driver changes. Until that happened, the situation stayed unchanged and unclear.
Across Samsung M2070 troubleshooting reports, the recurring pattern is that Samsung M2070 not printing, toner not compatible errors, and Wi-Fi setup failures are often not caused by driver faults. Most outcomes point to cartridge recognition behavior, driver compatibility with the operating system, or device-side network configuration rather than a broken or missing driver.
Other multifunctional printers showing similar behavior:
- Scans your system for missing or outdated drivers
- Downloads and installs the correct versions
- Creates a restore point before making changes