Intel Ethernet Controller I225-V Driver

Looking for the latest intel ethernet controller i225-v driver so your network runs reliably and at full speed? You’re in the right place. This page helps you quickly get the correct package for Windows 10 32-Bit, Windows 11, with clear install steps and fixes if anything goes wrong. We also list the driver model name as Intel Ethernet Controller I225-V Driver to ensure an exact match for your hardware.

Driver download - intel ethernet controller i225-v driver

Device Type: Network Adapters

Operating System: Windows 10 32-Bit, Windows 11

Driver model name: Intel Ethernet Controller I225-V Driver

Driver version: 2.1.4.3

Date added: 2025-10-31

Tip: Verify the adapter listed in Device Manager matches “Intel Ethernet Controller I225‑V”. If you’re unsure, install via Device Manager using the INF method below.

Click on the download link.

How to install

Troubleshooting common issues

- No network after install: In Device Manager, right‑click the adapter → Uninstall device → check “Delete the driver software for this device” → OK. Reboot, then reinstall using the INF method. - Code 10 or Code 31 errors: Ensure you used a package compatible with Windows 10 32-Bit, Windows 11. Disable driver signature enforcement temporarily if using a test build: Settings → Update & Security → Recovery → Advanced startup → Troubleshoot → Startup Settings → Restart → press 7. - Random disconnects or low speed: In Adapter Properties → Advanced, set “Energy Efficient Ethernet” to Off and “Speed & Duplex” to 1.0 Gbps Full Duplex. Update to the latest intel ethernet controller i225-v driver afterward. - PXE boot or VLAN features: Install the full Intel PROSet package if you need advanced features; otherwise the base Intel Ethernet Controller I225-V Driver is sufficient. - Still failing: Run “Network Reset” (Windows Settings → Network & Internet → Advanced network settings → Network reset), then reinstall the driver.

FAQ

Which operating systems are supported?
The package on this page targets Windows 10 32-Bit, Windows 11 for the Intel I225‑V controller.

How do I verify I have the correct hardware?
Open Device Manager → Network adapters. You should see “Intel Ethernet Controller I225‑V.” If shown as “Unknown device,” use Hardware IDs to confirm, then install the intel ethernet controller i225-v driver via the INF method.

Do I need Intel PROSet?
For basic connectivity, the base Intel Ethernet Controller I225-V Driver is enough. Install PROSet only if you need advanced features like VLANs, teaming, or diagnostics.

Can I roll back if the new driver causes issues?
Yes. Device Manager → Adapter → Properties → Driver → Roll Back Driver. You can then reinstall a known‑good intel ethernet controller i225-v driver.

Why get your driver here?

driverfiles.net provides curated, malware‑scanned packages, clear version and OS details, and step‑by‑step guides. That means a safe, trusted place to download the intel ethernet controller i225-v driver for Network Adapters on Windows 10 32-Bit, Windows 11 - with fewer surprises and faster installs.