Realtek USB GbE Ethernet Controller Driver

Looking for the realtek usb gbe ethernet controller driver so your USB Gigabit adapter works reliably? You’re in the right place. This page helps you get the correct package fast, with clear install steps and fixes for common issues.

We list the exact device type and supported Windows versions, provide a clean entry, and guide you through installation so you can get online without hassle.

Download - Realtek USB GbE Ethernet Controller Driver realtek usb gbe ethernet controller driver

Driver model: Realtek USB GbE Ethernet Controller Driver

Device type: Network Adapters

Supported OS: Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit, Windows 11

Date added: 2025-10-31

Tip: Save your work and close networking apps before installing to avoid interruptions.

Click on the download link to get the driver.

How to install

Troubleshooting

• Device not detected: Try a different USB port (prefer rear I/O on desktops), avoid unpowered hubs, and check the cable.
• Code 10 or Code 28 in Device Manager: Uninstall the device, check “Delete the driver software for this device”, unplug, reboot, then install using the EXE or INF method and reconnect.
• Signature enforcement errors: Temporarily enable advanced startup options to allow driver installation, then re‑enable protection after the install.
• Slow or unstable link: Disable USB selective suspend in Power Options, and turn off “Allow the computer to turn off this device to save power” in the adapter’s Power Management tab.
• Conflicting legacy drivers: Remove older Realtek/ASIX/AX drivers, reboot, then reinstall the correct package for your adapter.
• Verify hardware match: In Device Manager → Properties → Details → Hardware Ids. Ensure it matches the intended USB GBE controller before installing.

FAQ

Q1: Is this the right realtek usb gbe ethernet controller driver for my USB Gigabit adapter?
A: If your adapter identifies as a Realtek USB GBE controller in Device Manager and the hardware IDs match, this package for Realtek USB GbE Ethernet Controller Driver is appropriate.

Q2: Do I need to uninstall old drivers first?
A: It’s recommended. Remove older USB Ethernet drivers, reboot, then install the new package to prevent conflicts.

Q3: The installer finished, but there’s no network connection. What should I do?
A: Reboot, try another USB port, confirm the adapter appears under Network adapters, update via the INF method if needed, and verify the Ethernet cable and router. You can also roll back or reinstall the realtek usb gbe ethernet controller driver.

Q4: Will this work on my version of Windows?
A: Yes - it supports Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit, Windows 11. Ensure you install using administrator privileges.

Q5: Where do I find the file name and version?
A: See the Download section above for the file entry and the version field .

Why download from driverfiles.net

We focus on safe, trusted packages, clear metadata, and step‑by‑step guidance. Each page highlights device type Network Adapters, supported platforms Windows 7 32-Bit, Windows 8 32-Bit, Windows 10 32-Bit, Windows 11, and a clean reference so you can install the realtek usb gbe ethernet controller driver quickly and confidently.